Cara Mengatasi Error Code 43 Stopped Device (Mudah)

Sometimes you may see this error message: Windows has stopped this device because it has reported problems (Code 43). This usually means that the driver (which does NOT come from Seagate; this driver comes from Windows) has lost communication with the drive or the driver has crashed.

How do I fix error 43 Windows has stopped this device?

Update the device driver

On the list of devices, find the device that’s having driver problems (it will often have a yellow exclamation point next to it). Then tap and hold or right-click the device and select Properties. Select Driver, and then select Update Driver.

How do I fix Windows has stopped this device?

Before you start.
Fix 1: Restart the PC.
Fix 2: Unplug, plug in the device.
Fix 3: Remove other USB devices.
Fix 4: Uninstall Drivers.
Fix 5: Update Drivers.
Fix 6: Power Management.

How do I override code 43?

Reconnect Device – Unplug & replug device, switch USB port.
Replace Connection Cable – If the cable is broken, change a new one and reconnect the device to PC.
Restart PC – Unplug the problematic device, reboot PC. When PC restarts, reconnect and check the device.

What is a Code 43 problem?

It could mean that either your device has a hardware problem or a driver or software error causes Windows not to recognize it. Code 43 can occur with any hardware device visible in the Device Manager, though it most commonly happens to video cards and USB devices (like peripherals and external hard drives).

How do I restart a stopped Windows device?

Why did Windows stop my graphics card?

Hardware Issue– The error could appear due to the hardware issues such as a wrong inserted graphics card and its cables. So before moving out, make sure to check that the graphics card and cables are correctly connected.

Can Code 43 be fixed?

Error Code 43 can be caused by hardware problems or driver or settings corruption. To address this issue, we recommend performing a clean install of latest graphics drivers provided by the system manufacturer since these drivers are customized.

What is a code 43 USB?

The Code 43 error in the device manager indicates that Windows found an error with a USB device, and has therefore shut it down for usage within the operating system. The error means that one of the drivers which control the device, informs the operating system that the device has in some way failed.

How do I boot up in safe mode?

Press your phone’s power button.
When the animation starts, press and hold your phone’s volume down button. Keep holding it until the animation ends and your phone starts in safe mode.
You’ll see “Safe mode” at the bottom of your screen.

How do I fix USB device not recognized?

Press and hold (or right-click) the USB external hard drive with the issue, and select Uninstall. After the hard drive is uninstalled, unplug the USB cable. Wait for 1 minute and then reconnect the USB cable. The driver should automatically load.

Why is my USB device not recognized?

The various reasons for USB devices not recognizing errors are as follows: The drive software couldn’t completely load in the system. The drive may contain any malicious file; therefore, the system doesn’t read it. Due to the low system battery, the Root hub settings may have unrecognized the drive.

How do I fix USB device not recognized Windows 10?

Fix 1: Restart Your Computer.
Fix 2: Try a Different USB Port and/or Machine.
Fix 3: Run USB Troubleshooter.
Fix 4: Uninstall the USB Device.
Fix 5: Disable the USB Selective Suspend Setting.
Fix 6: Install the Latest Chipset Drivers for Your Motherboard.
Fix 7: Install the Latest Windows Updates.

How do I reinstall drivers on Windows 10?

Reinstall the device driver

In the search box on the taskbar, enter device manager, then select Device Manager. Right-click (or press and hold) the name of the device, and then select Uninstall. Restart your PC. Windows will attempt to reinstall the driver.

What is the command to reset drivers?

You can quickly reset your graphics driver using the Win + Ctrl + Shift + B keyboard combination.

How do I reset my drivers on my PC?

Use the key combination Win+Ctrl+Shift+B on your Windows 11/10 keyboard. The screen flickers and goes black for a second, and will be back in less than a second.

How do I force quit Device Manager?

You may find Services at the following path: Start–> Control Panel–> Administrative Tools–> Services. Highlight ‘AVTECH Device ManageR’ in the list of programs in the Name column by clicking on it once. You may select Stop, Restart or Start the service on the left side of the window.

How do I uninstall and reinstall graphics drivers?

Uninstall and Reinstall Graphics Drivers

msc, which will initiate the Device Manager. Locate the Display adapters, and double-click that icon to expand the devices included in that category. Right-click the device you want to uninstall the driver for, and use the option to Uninstall device.

How do I fix my graphics card on Windows 10?

One of the possible reasons why you’re getting graphics issues after updating to Windows 10 is because some components of your graphics driver is corrupted or needs to be updated. To resolve your issue, we suggest that you update drivers in Windows 10.

What happens if you uninstall graphics driver?

If you need to uninstall your graphics driver for any reason, your operating system should revert to some basic drivers that still allow the computer to handle video output.

How do I fix my graphics device?

Restart the PC. Restarting/rebooting the system is probably the most basic method that you can try in order to fix Failed to create a graphics device error.
Update graphics drivers. One of the most notorious causes for Failed to create a graphics device error is outdated graphics drivers.
Reinstall graphics drivers.